开思视频网

标题: 【1-5-5】Delcam PowerMILL 编程效率与质量分析 [打印本页]

作者: liujunyun 时间: 2011-7-15 11:32
标题: 【1-5-5】Delcam PowerMILL 编程效率与质量分析
Delcam PowerMILL 编程效率与质量分析视频总汇
【5-1】https://v.icax.org/thread-3715-1-1.html
【5-2】https://v.icax.org/thread-3717-1-1.html
【5-3】https://v.icax.org/thread-3720-1-1.html
【5-4】https://v.icax.org/thread-3721-1-1.html
【5-5】https://v.icax.org/thread-3723-1-1.html<您在这>
  Surface finish Quality
  Controlling toolpath Point spacing
The ability to "fine tune"the point-to-point data in the toolpath will ensure the machine tool is running at its best and will improve surface finish.Can benefit both 3 axis and 5 axis applications.
  Point distribution 5 axis example
  A right tool setup extend tool life and improves surface finish
a.few interfaces as possible(minimum addition of tolerances)
b.Recommended max run-out using a solid carbide end mill: 10 μm
c.Each added 10 μm run-out will reduce tool life by 50%
d.Spindle,tool setup,its overhang and unbalance do influence the maximum usable spindle speed
  Benefits of automatically the Maximum Tool Holder Prodile for a given tool
a.Quik and easy selection of the most rigid tool holder and overhang combination
b.No time consuming Tool Holder Collision Checks
c.Reduced vibaration
d.Faster feedrate
e.Extend tool life
f.Better quality surface finish+less hand finishing
  Tool Axis Smoothing
a.Smooth 5 axis rotary movement is essental for obtaining a good quality surface finish
b.Any Sudden or large change in the rotary axis over a small distance will leave undesirable cutter marks on the finished part

关于徳慷
广州市德慷软件公司是英国达尔康软件公司（Delcam Plc）指定的华南地区代理商, 拥有一支高素质的技术工程和销售队伍,能及时地为广大用户提供技术支持和完善的售后服务。它的前身为DELCAM广州办事处和DELCAM华南技术中心。
关于Delcam
Delcam Plc 是世界领先的专业化CAD/CAM软件公司。其软件产品适用于具有复杂形体的产品、零件及模具的设计制造，广泛地应用于航空航天、汽车、船舶、内燃机、家用电器、轻工产品等行业。特别对塑料模、压铸模、橡胶模、锻模、大型覆盖件冲压模、玻璃模具等的设计与制造具有明显的优势。

更多关于Delcam请点击：https://www.delcam.com.cn
更多关于本次研讨产品发布会请关注近期更新视频。icaxvideo

作者: Cieya 时间: 2011-7-15 11:32
Stepped on surface smoothing of C axis
1.Result of using stepped on surface stabillzation method.
2.The unsmoothed toolaxis is modified steps blended together
3.This ensures minimal C axis motion.
  Collision Verification
  Verification and simulation
a.Machine Simulation
b.Dtects Collisions
c.Displays Axial Movement
d.Allows Manual"Jogging"
e.Essential for"light out"machining
  Machine tool simulation and collision detection
  Automatic Collision Avoidance
a.Detects when tool or holder collides with model and automatically tilts the tool in a defined direction to avoid the collision.
b.Program for optimum tool axis instead of"Worst case"situation.
c.Works with Tool axis smoothing to avoid sudden rotary axis movements.

作者: zhzociboss 时间: 2011-7-16 17:04
需要积分。看了视频积分也不涨

作者: wkxq 时间: 2011-7-24 22:49
看一看，谢谢！

作者: eng1875 时间: 2011-9-14 15:30
看一下，是否可行

欢迎光临开思视频网 (https://v.icax.org/)